Neurodyn Aussie Sport is an electrical current application equipment via electrodes in direct contact with the patient. It is a neuromuscular transcutaneous stimulator that uses the microcomputers’ technologies, with operation via touch.
The equipment is a transcutaneous neuromuscular stimulator is a four-channel stimulator with independent controls for current therapy used in Aussie Current (Burst Modulated Medium Frequency), they can be used simultaneously or not. All the parameters’ information chosen by the professional will be shown in an alphanumeric crystal liquid screen.
The Neurodyn Aussie Sport’s stimulus has a waveform that is way more comfortable than many of the other traditional stimulations. Therefore, this stimulus probably is more enjoyable to most patients. The sensation intensity is controlled by adjusting the equipment’s parameters (controls).
The Aussie Current
This Neurodyn produces an Aussie Current, a new generation of electrical currents for stimulation with advantages over the traditional stimulation methods (Russian, Interferential, TENS and FES). This technique is non-invasive, it does not cause dependency and it does not have undesirable collateral damage.
It produces two different frequencies: 1 Khz and 4 Khz, that allows the professional to select according to the therapeutic effect. The 1kHz frequency is used for strengthening or toning the muscles, the 4 kHz one is used for lymphatic drainage and analgesia. The current produces short duration bursts (2 milliseconds in the 1 kHz current and 4 milliseconds in the 4 kHz), with variable frequency of 1 to 120 Hz and intensity from 1 to 180 mA.
The stimulation can be done in the following modes:
- Continuous mode: in this mode, the stimulation is constant and continuous.
- Synchronized mode: (with ramps ON, OFF, Rise and Decay) where the 4 channels work at the same time, synchronized. The stimulation sensation follows the time set on the ramps.
- Reciprocal mode: (with ramps ON, OFF, Rise and Decay) where the channels 1 and 3 work alternately with the channels 2 and 4. The stimulation sensation follows the time set on the ramps.
Operation and Stimulation Modes
Aussie Current Sensorial Stimulation (maximum comfort)
The sinusoidal current with frequency of 4.000 Hz (4 kHz) and burst modulation of 4ms is used in this kind of stimulation. The maximum comfort stimulation produces a smaller torque than the motor stimulation (maximum torque) and may be used, for example, in cases of pain and discomfort generated by different kinds of tissue injuries.
This stimulation form is the best to control de pain via Gate Control Theory, originally presented by Melzack and Wall (1965) as well as due to the release of endogenous opioids. In this case, the necessity is not to produce muscular torque, but to activate the nerve fibers ABeta (large diameter fibers) with minimum small diameter fibers activation A Delta and C (pain).
Aussie Current Motor Stimulation (maximum torque)
The sinusoidal current with frequency of 1.000 Hz (1KHz) and burst modulation of 2ms is used in this kind of stimulation. The frequency of 40-50Hz is indicated for more vigorous contractions. Frequencies over 50Hz produce more torque, but a level of fatigue may occur. The fatigue occasioned by higher frequencies does not happen due to tired muscles fibers, but the result of electrical activity that is no longer capable of activating the contractile apparatus of muscle fibers.
When fatigue is a problem, lower burst frequencies (20-40 Hz) must be used. A smaller torque will be produced, but a lower level of fatigue will be achieved.
Using lower frequencies are recommended for some conditions, like the prevention of post-stroke shoulder subluxation. The treatment must simulate the frequencies normally used physiologically to activate the slow contraction fibers or muscular fibers resistant to fatigue in relatively low activity levels sustained by longer periods of time, aiming to prevent and limited atrophy and the stretching of the joint capsule. Frequencies between 10 Hz and 20 Hz are recommended.
Actions and Benefits
- Offers the Aussie Current.
- Counts with some pre-programmed protocols.
- LCD screen and bigger display.
- Elegant and differentiated design.
- Easy to transport.
- Makes it possible to work in diverse areas of physiotherapy and esthetics.
- Non-invasive treatments.
General Indications of Use
- Temporary relaxation of muscle spasms.
- Prevention or retardation of disuse atrophy in post-injury type conditions.
- Increasing local blood circulation.
- Muscle re-education, strengthening and relaxation.
- Maintaining or increasing the range of motion.
- Control and reduction of inflammatory conditions.
- Edema drainage.
- Symptomatic relief of chronic intractable pain, acute post-traumatic pain or post-surgical acute pain.
- Pre and post-operative.
- Do not use this device on patients who have a cardiac pacemaker, implanted defibrillator, or other implanted metallic or electronic device because this may cause electric shock, burns, electrical interference, or death.
- This device should not be used for symptomatic local pain relief unless etiology is established or unless a pain syndrome has been diagnosed.
- On patients suspected of carrying infectious diseases and/or disease where it is advisable for general medical purposes to suppress heat or fevers.
- Long-term effects of chronic electrical stimulation are not known.
- Over the carotid sinus nerves, particularly in patients with a known sensitivity to the carotid sinus reflex.
- Do not apply it over the neck or mouth.
- Do not apply it transthoracically to avoid the introduction of electrical current into the heart which may cause cardiac arrhythmias.
- Do not apply it through the brain.
- Do not apply it over swollen, infected, or inflamed areas or skin eruptions, such as phlebitis, thrombophlebitis, varicose veins, etc.
- Do not apply it on or near cancerous lesions.
- Do not apply stimulation in the presence of electronic monitoring equipment e.g., cardiac monitors, ECG alarms).
- Do not apply stimulation when the patient is in the bath or shower.
- Do not apply stimulation while the patient is sleeping.
- Do not apply stimulation while the patient is driving, operating machinery, or during any activity in which electrical stimulation can put the patient at risk of injury.
FAQ (Frequently Asked Questions)What really is the Aussie Current?
- The Aussie Current is a therapeutic alternating electrical current with its frequency in the range of kHz with some similarity to the interferential current and the Russian Current. The Aussie Current can be used for relaxation and muscular strengthening.What are the main differences between the Aussie Current and the Russian Current?
- Both currents are high frequency alternating, but the Aussie Current has two carrier frequencies: 1 KHz with pulse duration equal to 2ms and 4KHz with pulse duration of 4ms. The Russian Current has 2,5 KHz and pulse duration of 10 ms. Research suggests that due to the therapeutic parameters adopted by the Aussie Current, muscle fatigue and discomfort generated by the stimulation gets retarded, making the therapy more comfortable and efficient.Can the Aussie Current be used for the recovery of the muscular function and pain modulation?
- Yes, it can. The Aussie Current allows the therapist to act in modulating pain charts, in the functional recovery of the skeletal muscles and in the lymphatic stimulation. To do that, the carrier current parameters and the pulse duration must be modified according to each treatment’s objective.
Instructions to Take Care of Your Equipment
- Avoid areas subject to vibrations.
- Install the equipment on a firm and level surface, in open air.
- Do not block ventilation.
- Avoid humid, hot and dusty environments.
- Make sure the area around the network cable is free.
- Do not insert objects into device holes.
- Using different accessories from the ones indicated and compatible with this device may increase the emissions or in the decrease of the equipment’s immunity.
- The professional must use gel to apply the currents offered by the equipment. One must always use neutral conductor gel, without air to better the current conduction.
- In case of obesity, the adipose tissue thickness isolates the motor nerve, that may cause a current‘s sensitivity variation.
- If there is a peripheral neuropathy, there is no answer to the short duration electrical stimulus.
- It may irritate the skin.
- The patient must get used to the stimulation on the skin progressively to know how much is tolerable.
- Brand name: Ibramed
- Model: Neurodyn Aussie Sport
- Buttons: Soft Touch
- Quantity: 01
- Item color: White and Black
- Languages: Portuguese, English and Spanish
- Length: 10.4’’ in (26.5 cm)
- Width: 10.6’’ in (27 cm)
- Height: 4.9’’ in (12.5 cm)
- Item weight (equipment only): 2.42 lb (1,1 kg)
- Item weight with accessories: 4.18 lb (1,9 kg)
- Power type: Electric
- Power Input: 100 / 240V~ 50/60 Hz
- Input Power: 85 VA
- Output channels: 4 independent channels in range
- Carrier frequency: 1 kHz (motor stimulus) and 4 kHz (sensorial stimulus)
- Frequency: from 1 to 120 Hz
- Burst duration: 2ms (1kHz) or 4ms (4 kHz)
- Intensity: 1 to 180 mA
- Burst frequency: from 1 Hz to 120 Hz
Application time: variable from 1 to 60 minutes
- On: variable from 0 to 60 seconds
- Off: variable from 1 to 60 seconds
- Rise: pulse train rise time variable from 1 to 20 seconds
- Decay: pulse train descent time variable from 1 to 20 seconds.
- Fuses: 5A 250V~ (20AG)
- Electrical Class: Class II
- Electrotherapy: Type BF
- Temperature Range During Transport and Storage: 5 - 50°C / 41 - 122 °F
- Environment operating temperature range: 5 - 45 °C / 41- 113 °F
- Regulatory Compliance:
- IEC 60601-1
- IEC 60601-1-2
- IEC 60601-2-10
- Warranty: 18 months
- 01 Plug line cord (Length 1.5 m)
- 01 Kit Electrotherapy Lead Wire Banana Plug - Channel 1– orange / Kit Channel 2 – black (1.5m)
- 01 Kit Electrotherapy Lead Wire Banana Plug - Channel 3 blue / Channel 4 – green (1.5 m)
- 02 Electrode - Valu Trode - Model CFF202 2” x2” or 5cm x 5cm (four/electrode/pkg)
- 01 CD user manual
- 01 Protection fuse 20AG 2A
- 01 Protection Fuse Chart
- 01 Bag sapphire line
- For safe use of the equipment, it is recommended to have it inspected and undergo preventive maintenance at IBRAMED or an authorized technical center every 12 months.
- Do not alter this equipment. Any unauthorized modification can affect the safety of this equipment.
- Never make unauthorized repairs.
- Read the manual before using the equipment.
The product is very good, and it delivers what it promises
The product is excellent, and I am very satisfied with it.
I am still learning all the features, but it surpassed my expectations!
It matched my expectations